Sold Out! - Rs. 700.00
handle features an ergonomically designed over-molded rubber slip-resistant grip for optimum comfort hex keys made from high torque alloy steel of higher quality than Cr-Mo or Cr-V easy identification...
Kit of small items needed to assemble 3T forks. Kit comprises: - Sandpaper Sleeve - Top screw - Brakemount nut - Top cap carbon - Assembly adhesive Preparation items
Effective Tool for Precision Crimping This is a tool needed when changing the inner housing. You could use the this to fix the copper housing and the end caps of...
Cable cutter for the secure cut off of shift and brake bowden cables as well as shift and brake wires Due to the uniform cutting off, a fraying is prevented...
Chain whip for multi speed freewheel.
Alligator Crank Wrench-14mm Socket 4mm and 8mm Socket suitable for Crank Bolts and Crank Arms removal
Adjustable disc depth for precise bending Disc Recovery recovers deformed disc rotors
Sold Out! - Rs. 990.00
Hydraulic hose cutter for ultimate and other fiber braided hoses The alligator hose-cutter was designed so that you could cut your hydraulic disk brakes without crushing them. Everything you need...
Sold Out! - Rs. 2,990.00
Universal bleeding kit for all hydraulic disc brake systems. Set featuring two injections, tubes, valves and adapter.
Alloy quick release set with titanium axle and alloy lever Front and Rear Black Anodized Weight 47g
Sold Out! - Rs. 1,575.00
HYDRAULIC BLEEDING KIT FORSHIMANO, AVID, MAGURA & HAYES
Sold Out! - Rs. 1,990.00
The SRAM Bleeding Edge Brake Bleed Tool allows you to quickly and easily bleed Guide and Level Ultimate and Level TLM and TL brakes. You can use this tool with...
This is an Avid Hand-Held Hydraulic Line Cutter. Easily cut a clean and perfect hydraulic line to length every time with this hand-held line cutter. Features: Hand-held hydraulic hose cutter...
This is the Avid Professional Bleed Kit (Dot 5.1) for Avid Disc Brake Systems maintenance and re-bleeding. This system contains everything you need to service, adjust, or install your disc...
Sold Out! - Rs. 121,600.00
Completed set of 82 pcs with 3-15 and 10-60 torque wrenches, hexagonal and torx wrenches with T handle, combined fork and polygonal wrenches, screwdrivers, pliers, files, hammer, rauche with...
BB tool for Shimano Octalink The BBT-18 is a heavy duty, investment cast tool for installing and removing the following eight-notch bottom bracket cups: Shimano Octalink- right cup with external notches...
Sold Out! - Rs. 1,320.00
The BBT-22 is a shop quality tool for installing and removing Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat...
CNC-machined adjustable aluminum chain tug. Fits fork ends up to 9mm thick.
Sold Out! - Rs. 1,960.00
b14 bit-based tool system with a magnetized socket driver. the b14 includes:hex bits: #1.5, 2, 2.5, 3, 4, 5, 6, 8screwdrivers: phillips #1, phillips #2, flat #1, flat #2torx:...
m10 the ultimate trailside companion. these high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. the m10...
Sold Out! - Rs. 999.00
m5 the ultimate trailside companion. these high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. the m5...
Sold Out! - Rs. 1,040.00
refresh kit the all new refresh kit for crankbrothers pedals includes premium internal components the kit includes: enduro catridge bearings, igus ll-glide bearings, double seal system (internal and external...
SNAP IN holder · Use in combination with various adapters.
Cyclus tools axle adapter for truing stand. Upto 24mm Diameter (Pair)
This tool is used to remove 16mm axles for BMX freewheels.
Bottom Bracket Remover Tool for: Shimano BB-UN 51/71/72 Kinex Ally Tecora Plastic
Cassette Tool Shimano Solid Axles ( With Handle)
Cyclus Cassette Tool Shimano Hyperglide For HG cassettes, suitable for 24 mm wrench
Compatible with: Shimano HG full axle Shimano HG hollow axle Shimano lock ring for brake discs Miche Shimano Miche Campagnolo
Cycle - Chain rivet extractor Shimano 7/8/9 /10 sp With adjustable stop and guide for the pin. suitable for 7- / 8- / 9-speed chains suitable for Shimano 10-speed chains...
Chain whip to keep the cassette from rotating while removing the lock ring. For 6/7/8-speed or 9/10-speed cassettes.
With this tool is to fix the chainring bolt nuts to the mounting and demounting, in order to prevent the co-rotation of the nut.
Extra heavy chain tool for workshop useWith adjustable stopSuitable for all 7/8/9 speed chainsSuitable for Shimano 10-speed chains
The Cyclus Pedal Spanner Doublesided 15mm allows installation and removal of pedals with ease.The spanner is the perfect length to provide that extra leverage recquired to remove stubborn pedals.Cyclus tools...
With the Alignment Tool check and correct the exact geometric position of the dropouts of the frame for dropouts. Information Check before milling the disc brake mounts and mounting...
Enables a fast and accurate mounting of the crown race onto the fork crown For 1", 1 1/8" and 1.5 "
The new freewheel remover from Cyclus Tools you can easily disassemble cassettes and sprockets. Compared to the previous tool, where a chain was integrated, the new tool holds up...
Cyclus Handles For Seat Tube Reamers 270 mm Mill Depth
Cyclus Headset Press 1" & 1 1/8" With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Features Tool holder with T-handle...
Headset cup remover makes headset cup removal easy. Fits 1 1/8" or 1 1/2" headset cups.
Such a tool is absolutely indispensable for the correct mounting of headsets, because inappropriate tools (e.g. hammers) often damage the sensitive bearing cups. This Cyclus high-quality tool offers the...
Cyclus nipple driver is extra long so it could be used for high profile rims.
The Cyclus Tools repair tapping screw scrapes the damaged thread and cuts the larger repair thread in just one operation. You save valuable time and money because you only need...
Cyclus Press Brush for 720183 SEMI-HIS" This press-in tool enables you to quickly and easily press in threaded undershafts. The press-in tool prevents tilting of the bearing shells on...
Cyclus Tools remover for cantilever bosses SW 9 mm - 3/8 inch socket. When installing disc brakes, cantilever bosses on your frame and on your fork are no longer...